Set The Steering Wheel Position; Refuelling; Filling The Wiper Fluid Container; Fill Water Reservoir (For Sweeper) - Kärcher MC 130 Bedienungsanleitung

6.4

Set the steering wheel position

DANGER
Risk of accident!

Do not adjust the steering wheel position while driving.
1 Lever, steering wheel inclination adjustment
2 Clamping lever, steering wheel height adjustment
3 Pedal brush contact pressure
For description, see Chapter "Pedals".
The inclination and height of the steering wheel can be ad-
justed.
Inclination adjustment: Operate the lever and incline

the steering wheel until the desired position is reached,
then release the lever.
Height adjustment: Open the clamping lever and ad-

just the steering wheel to the desired height, then close
the clamping lever again.
6.5

Refuelling

Danger
Risk of explosion!
– Do not refuel the machine in enclosed spaces.
–
Smoking and open flames must be strictly avoided.
– Ensure that no fuel reaches the hot open surfaces.
1 Tank lid
Switch off engine.

Open fuel filler cap.

Fill in diesel.

Only use the fuels specified in the Operations Manual.
Insert the fuelling gun as deep as possible into the fuel

nozzle. Do not add any more fuel once the fuelling gun
stops according to the settings.
Wipe off any spilt fuel and close fuel filler cap.

70
6.5.1 Fuelling using a can
Estimate the fuel requirement in order to avoid over-
–
flows.
6.6

Filling the wiper fluid container

1 Wiper fluid container
2 Cover
3 Fill level indicator hydraulic oil tank
Unlock the right motor cowling and remove with the at-

tachment frame being raised (see Chapter "Panels").
Remove the cover from the wiper fluid container.


Use a water and antifreeze mixture to refill.
Note
Please observe the information of the manufacturer!
Close the lid.

Reinstall the motor cowling.

6.7

Fill water reservoir (for sweeper)

1 Filling nozzle
2 Symbol for the "Fill" lever position
3 Symbol for the "Closed" lever position
4 Switch lever
5 Filling level indicator water tank
Unscrew the lid of the filler neck for fresh water.

Switch lever in the "Fill" position.

Attach the water supply hose to the filling nozzle and fill

the water tank.
NOTICE
Do not insert the water hose to fill the water tank (avoids
water getting sucked back in).
Shut off water supply.

Remove the water supply hose and close the filler neck

for fresh water.
Switch lever in the "Closed" position

18
-
EN