Kärcher MC 130 Bedienungsanleitung Seite 94

11.4.16 Greasing the vehicle
Lubrication point
1 * not shown
Pivot bearing and lifting cylin-
der of the front power lift
2 Articulated steering in centre
of vehicle
3 Steering cylinder
4 Lower bearing articulated
joint
5 Lifting cylinder
6 Lift platform
7 Drive pedal
8 Reversing lever brake pedal 1
ATTENTION
Risk of functional disturbances. Do not let the V-belts get
in contact with the grease.
Grease the grease nipples in accordance with the lubri-

cation intervals (table) using a grease gun.
Use high quality multi-purpose grease and use grease

gun to lubricate.
94
Number Lubrica-
of lubri- tion inter-
cation val
points
1 each Daily
2 Daily
2 Daily
1 Daily
4 Weekly
2 Daily
1 monthly
monthly
EN
11.4.17 Lubricating the sweeping system
Figure: Left and right side brush arm swivelled inwards
Lubrication point
1 Brush head lifting arm axle
2 Cylinder lifting arm axle
3 Swivel bearing lifting arm axle 1 each
4 Swivel bearing cylinder axle
Grease the grease nipples in accordance with the lubri-

cation intervals (table) using a grease gun.
Use high quality multi-purpose grease and use grease

gun to lubricate.
Figure: Left and right side brush arm swivelled outwards
Lubrication point
1 Swivelling cylinder brush arm
axle
2 Swivel bearing base support axle 1 each
3 Suction mouth cylinder support 1
4 Suction mouth cylinder basic
body
5 Swivelling cylinder base sup-
port axle
6 Swivelling cylinder base sup-
port axle
42
-
Number Lubrica-
of lubri- tion in-
cation terval
points
1 each Daily
1 each Daily
Daily
1 each Daily
Number Lubrica-
of lubri- tion in-
cation terval
points
1 each Daily
Daily
Daily
1 Daily
1 Daily
1 Daily