Kärcher MC 130 Bedienungsanleitung Seite 96

11.5.4 Cleaning the waste container and cover
1 Waste container
2 Waste water sieve
3 Diffuser grid
Raise the emptied waste container.

Unlock the diffuser grille (4 retaining clips).

Clean waste container and cover by means of a water

jet.
Clean the area behind the waste water sieve by means

of a water jet.
11.5.5 Cleaning recycled water valve
1 Bayonet catch
2 Valve recycled water
3 Waste container
Raise the emptied waste container.

Open the bayonet catch.

Remove the valve and clean it under running water.

96
11.5.6 Cleaning the blower chamber
1 Side cover
2 Blower chamber
Unscrew 2 screws of the side cover.

Swivel out the side cover.

Clean the blower chamber by means of compressed air

or a moist cloth.
11.5.7 Cleaning the vacuum system
Clean soiled vacuum system (can be determined due to
vehicle vibrations caused by the suction blower running
out of true).
Empty waste container before cleaning the vacuum sys-
tem.
Start the motor.

Switch on PTO (on control panel of the arm rest).

Select engine speed 2200 rpm.

Switch on the suction blower.

With the water hose, spray fresh water in the suction

mouth area.
Note
The water collects in the water container of the waste
container. The cleaning process has been completed
successfully when clean water escapes from the diffus-
er.
Empty/tip out the water container.

Let the suction blower run to dry the container.

Note
Call Customer Service if, in spite of thorough cleaning, vi-
brations are still present (caused by the suction blower
running out of true).
44
-
EN