Kärcher MC 130 Bedienungsanleitung Seite 68

5.13.2 Control elements sweeping
1 e function „eco"
switches on the complete work programme.
PTO, side brush, suction blower, fresh water, water cir-
culation (recycled water)
2 Water pump on/off
3 Raise/lower sweeping system and switch on/off the
brush
4 Lower/raise and switch on/off right side brush (optional)
5 Raise/lower suction mouth
6 PTO on/off
7 Activation 3rd side brush (optional)
8 Inclination 3rd side brush (optional)
9 Water circulation function on/off
10 Suction blower on/off
Note: The suction blower has an after-running time of
approx. 15 s after switch-off
Note
The indicators in the switches are illuminated when they
are switched on.
5.13.3 Control elements waste container
The switch for emptying the waste container is located to
the right of the driver seat.
1 Lower the waste container/attachment frame
2 Raise the waste container/attachment frame
3 Additional outlet 12 V
68
5.13.4 Control elements spraying
1 Dosing knob - spraying left side brush
2 Dosing knob - spraying right side brush
3 Dosing knob - spraying suction mouth
To add the spray water, press the button water pump

"on" on the control panel.
The addition of the spray water takes place with the

dosing knobs.
Rotation to the left, the spray water volume is in-

creased.
Rotation to the right, the spray water volume is re-

duced.
16
-
EN