Front Power Lift (Option) - Kärcher MC 130 Bedienungsanleitung

8.4

Front power lift (option)

The front power lift (option) serves as a retainer for various
attachments with 3-point retainer.
To remove/attach a front power lift, a changing carriage is
required (optional accessory, order no. 2.852-067.0).
8.4.1 Preparation
Place the vehicle on a level and solid surface to re-

move/attach the front power lift.
8.4.2 Attaching the front power lift to the
vehicle
1 Lock lever
2 Retainer front power lift
3 Retaining frame vehicle
The locking lever on the vehicle must be in the un-

locked position (top lever position).
Position the front power lift centrally in front of the vehi-

cle using a pallet truck.
Insert the front power lift into the retaining frame of the

vehicle up to the stop.
1 Lock lever
Lock the front power lift (bottom lever position).

Important note
See chapter "Checking/adjusting attachment lock".
Lower the pallet truck and move it out.

Connect the hydraulic hoses with the relevant cou-

plings.
Note
Prior to attaching the hydraulic hoses, depressurise the
hydraulic system.
31
-
EN 83