HIKOKI Dust Extractor System Handhabungsanleitung Seite 6

English
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease.
Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in
unexpected situations.
5) Battery tool use and care
a) Recharge only with the charger specifi ed by the
manufacturer.
A charger that is suitable for one type of battery pack
may create a risk of fi re when used with another
battery pack.
b) Use power tools
designated battery packs.
Use of any other battery packs may create a risk of
injury and fi re.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another.
Shorting the battery terminals together may cause
burns or a fi re.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, fl ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
e) Do not use a battery pack or tool that is damaged
or modifi ed.
Damaged or modifi ed
unpredictable behaviour resulting in fi re, explosion
or risk of injury.
f) Do not expose a battery pack or tool to fi re or
excessive temperature.
Exposure to fi re or temperature above 130°C may
cause explosion.
g) Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specifi ed in the instructions.
Charging improperly or at temperatures outside
the specifi ed range may damage the battery and
increase the risk of fi re.
6) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
b) Never service damaged battery packs.
Service of battery packs should only be performed
by the manufacturer or authorized service providers.
PRECAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of
children and infi rm persons.
DUST EXTRACTOR SYSTEM SAFETY
WARNINGS
1. Before using the rotary hammer, be sure to read its
instruction manual carefully.
2. Do not use the tool for any purposes other than those
specifi ed.
3. Follow the instruction manual when attaching the dust
extractor system to the rotary hammer, and when
cleaning the dust extractor system, changing its fi lter,
etc.
only with specifi cally
batteries may exhibit
4. Use only the accessories and attachments that are
specifi ed in this instruction manual and our company's
catalogs.
5. Substances such as silica and asbestos are harmful
to the human body. Perform anti-dust measures when
working with materials that contain such substances.
6. Wear safety goggles and a dust mask.
7. If any tools or equipment are accidentally dropped or
bumped, carefully inspect them to make sure there is no
damage, cracks, or deformation.
Using tools or equipment with damage, cracks, or
deformation may result in injury.
NAMES OF PARTS (Fig. 1–Fig. 20)
Nozzle
Dust housing
Depth adjustment
button
Slider
Nozzle adjustment
button
Dust box
Dust box latch (both
side)
Filter (internal)
Tool bit (drill bit)
Battery
Dust extractor system
rail
Rail slot
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
Dust Extractor System
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/EU
on waste electrical and electronic equipment and
its implementation in accordance with national
law, electric tools that have reached the end
of their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Direct current
V Rated voltage
6
Dust box cover
Cyclone chamber
Filter chamber
Latch (Filter cover)
Cylindrical protrusion
Round cavity
Nozzle seal
Notch in nozzle seal
Bump on nozzle seal
Groove in brush cap
C-ring