Brompton P Line Bedienungsanleitung Seite 23

SADDLE HEIGHT INSERT FITTING
Once you have the correct saddle position you can fit the saddle height insert. This should be fitted in cases
where the saddle height is too high at maximum extension. The saddle height insert will allow you to set the
saddle at the correct height each time the bike is unfolded.
SETTING THE SADDLE HEIGHT
ƒ Remember to use your usual cycling shoes at this stage
ƒ Adjust the saddle height so that when the pedal is at the bottom of the stroke and the heel of the shoe
is on the pedal, your leg is straight (fig. 15)
ƒ When pedalling with the front of the foot, your leg will be slightly bent at maximum extension
ƒ Once you are happy with the saddle height, mark the seatpost with a marker pen or tape at the top of
the seat-slide tube (fig. 16)
ƒ The minimum height of the seatpost is reached when the seatpost extends out of the seat tube, below
the bottom of the frame; the bike should not be ridden with the seatpost protruding from the bottom of
the seat tube
ƒ If you are unsure about the fitting process, your Brompton dealer will be able to assist you
Fig. 15
Mark with pen here
22 23 23
Fig. 16
Seatpost
Seat-slide tube