Cleaning & Lubrication - Brompton P Line Bedienungsanleitung

CLEANING & LUBRICATION
It is important to lubricate components to keep them running safely and efficiently. We recommend you do
this regularly, though some parts will need more frequent lubrication.
The chain has to be well-lubricated for smooth pedalling. Apply chain lubricant while turning the pedals
backwards, making sure it flows onto the rollers; allow the oil to work in by continuing to turn the pedals
backwards, then wipe off any excess.
When lubricating the chain its worth remembering that you are trying to lubricate the chain rollers and not
the plates, any lubricant on the plates isn't going to aid drivetrain efficiency and will simply serve to attract
dirt. The best method is to carefully apply one drop of lubricant to each roller, this will take a little longer than
just squirting lube on the chain while you back pedal, but will ensure the lube gets where it's needed and
nowhere else.
The thread of the hinge clamp bolt and its washer should be greased occasionally. A thin smear of grease on
the inside faces of the clamp plates also help them release more easily.
The gears and bearings are sealed; greasing need only be carried out during a major service by a bicycle
mechanic.
When lubricating your Brompton, avoid getting oil or grease on the seatpost or the wheel rims. Any good
quality general purpose grease is satisfactory. For the chain, 'dry' chain lubricants with good penetrating
properties give the best results. Consider the environmental impact of the lubricants and greases you use.
We advise using a bucket of hot soapy water and a sponge to clean the bike. Do not use a hose or pressure
washer as this can force water into bearings and moving parts, driving out lubricant and causing corrosion.
21