Brompton P Line Bedienungsanleitung Seite 10

FOLDING THE BIKE
1. Spin cranks
Stand on the left
(non-driveside) of the
bike. Spin the cranks
so the right-hand
pedal is pointing
towards the back of
the bike.
2. Fold rear wheel
Turn the handlebar slightly to the left so it is
not parallel with the rear wheel. There is a
lever directly below the seat clamp. Press it
forward, then lift the rear of the bike swiftly
allowing the rear wheel to swing under the
main frame.
The bike should now be in
the "parked" position – it
will stand by itself on level
ground.
1.
2.
3. Undo hinge
Undo the hinge clamp
lever on the mainframe in
preparation for the next
step.
10