Angelo Po 06WFR3GD Bedienungsanleitung Seite 36

ENGLISH
Even if the equipment has all its safety devices,
if necessary, during the installation and connec-
tion other safety devices may be supplemented
in accordance with applicable laws.
The illustration shows the position of the de-
vices.
Gas supply tap: for turning the connection
A)
to the gas supply line on and off .
Safety thermocouple: cuts out the gas sup-
B)
ply if the fl ame goes out.
Safety thermostat: cuts off the gas supply
C)
in case of overheating.
The illustration shows the position of the signs
provided.
Nameplate with manufacturer and appli-
A)
ance data.
WARNING: read the manual care-
B)
fully before carrying out any procedure.
WARNING: when washing the appli-
C)
ance do not point pressurised water jets at
internal parts.
WARNING:all relevant regulations
D)
must be complied with. "Install in compli-
ance with the relevant regulations and use
in well ventilated premises only".
WARNING: all relevant regulations
E)
must be complied with. "No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instruc-
tions".
4
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
B
WARNING: watch out for hot sur-
F)
faces.
CE marking: this indicates that the equip-
G)
ment is compliant with all relevant laws ap-
plicable to the product.
SAFETY
3019703_ut_GB