ECOLAB Inspexx S Betriebsanleitung Seite 289

EN0H-1003GE23 R0822
Braukmann
D06FH
High Pressure Reducing Valve
With Balanced Seat and Set Point Scale
APPLICATION
According EN 806-2 pressure reducing valves of this type
protect household water installations against excessive
pressure from the supply. They can also be used for
industrial or commercial applications within the range of
their specification.
By installing a pressure reducing valve, pressurisation
damage is avoided and water consumption is reduced.
The set pressure is also maintained constant, even when
there is wide inlet pressure fluctuation.
Reduction of the operating pressure and maintaining it at a
constant level minimizes flow noise in the installation.
SPECIAL FEATURES
• Inlet pressure balancing – no influence on outlet
pressure by fluctuating inlet pressure
1
• Up to size 1 / " approved by LGA for low noise, Group 1
4
without limitations
• The valve insert is of high-quality synthetic material and
can be fully exchanged
• The outlet pressure is set by turning the adjustment
knob
• The set pressure is directly indicated on the set point
scale
• The adjustment spring is not in contact with the drinking
water
• Integral fine filter
• Easily retrofittable to convert valve to a reverse-rinsing
filter combination
• Can be retrofitted with an inlet check valve
• Also available without fittings
• All materials are UBA conform
• ACS certified
Product Specification Sheet • EN0H-1003GE23 R0822 • Subject to change
Pressure Reducing Valves
TECHNICAL DATA
Media
Medium:
Connections/Sizes
Connection sizes:
Pressure values
Max. inlet pressure:
Outlet pressure:
Preset outlet pressure:
Min. pressure drop:
Operating temperatures
Max. operating temperature
medium (10 bar):
Max. operating temperature
medium accord. to EN 1567:
Drinking water
1
/ " - 2"
2
25 bar
1.5 - 12 bar
5 bar
1 bar
70 °C
30 °C
1