ECOLAB Inspexx S Betriebsanleitung Seite 219

CAUTION!
Danger of slipping on wet floors
Liquids leaking in the working and preparation area can cause slipping and
injuries.
– Wear non-slip, chemical-resistant shoes when working
– Shut off the area of the escaping liquid
– Duly absorb any liquids escaping during work
– Keep a suitable container ready to collect the liquids during maintenance
work
1
3
Fig. 9: Bleed dosing pump
Prerequisite:
The station is connected to the water supply.
n
The pressure regulator is set to a maximum water pressure of 6 bar.
n
Main tap (water supply) is closed.
n
Open the safety gate.
1.
Open the water supply
2.
Press the vent knob
3.
With a sponge or cloth, absorb water as it emerges and remove from the
station.
Open the water supply further.
4.
1
2
3
2
slowly.
1
on the pump cover
2 3
43
Main tap (water supply)
Vent knob
Pump cover
until water emerges without bubbles.
MAN048969, Ver. 5-05.2024
Start-up