Mount Station - Ecolab Inspexx S Betriebsanleitung

5.4

Mount station

Protective equipment:
Tool:
Material:
Requirements
Suitability of the wall for wall mounting was tested was tested.
n
The selected installation location is above the disinfectant canisters.
n
NOTICE!
Damage to property due to improper wall mounting
Improper installation can lead to the screw connection being torn out of the wall
and resulting damage to property.
– Check suitability of the wall for wall mounting
– Use special dowels and screws if necessary
3
Fig. 4: Wandmontage
Prepare the mounting according to the information in Fig. 4 .
1.
Secure the station to the hoist.
2.
Lift the station align it and secure it to the wall with appropriate fasteners.
3.
To ensure that the station stays in place, lower the hoist slowly.
4.
Protective work clothing
n
Protective gloves
n
Safety shoes
n
Drill
n
Spirit level
n
Suitable hoist
n
Mounting set dosing device (Art. 286003)
n
1
5
2
6
4
33
Installation and assembly
Inspexx S
1
Canister holder
2
Drip tray
3
Height drip tray
4
Minimum distance between lower edge of canister
5
holder and lower edge of Inspexx S
Mounting height (lower edge Inspexx S)
6
Dimension "H" = Height drip tray + Distance
between lower edge of canister holder and lower
edge of Inspexx S
MAN048969, Ver. 5-05.2024