Flush The Station - Ecolab Inspexx S Betriebsanleitung

Maintenance
Connect the station to the drain.
1.
on page 41

Flush the station.

2.
9.2.1 Flush the station
WARNING!
Burns caused by harmful chemical products
Contact with hazardous chemical products can cause severe burns.
– Read the enclosed safety data sheet carefully before using the chemical
product.
– The safety regulations and the required protective clothing for working with
chemicals must be complied with.
– Safety devices such as showers and eye flushing must be accessible and
checked regularly to ensure that they are fully functional.
– Ensure adequate ventilation and extraction.
– Avoid skin and eye contact.
CAUTION!
Danger of slipping on wet floors
Liquids leaking in the working and preparation area can cause slipping and
injuries.
– Wear non-slip, chemical-resistant shoes when working
– Shut off the area of the escaping liquid
– Duly absorb any liquids escaping during work
– Keep a suitable container ready to collect the liquids during maintenance
work
Protective equipment:
Material:
Prerequisite:
Main tap (water supply) is closed.
n
Place the full water canister next to the disinfectant canister.
1.
Open the full water canister.
2.
Remove the suction lance from the disinfectant canister and insert it in the water
3.
canister. Make sure that the suction lance cannot draw air.
Close the disinfectant canister.
4.
MAN048969, Ver. 5-05.2024
Ä Chapter 9.2.1 'Flush the station' on page 56
Safety shoes
n
Chemical-resistant protective gloves
n
Protective goggles
n
Water canister
n
Make sure that the suction lance cannot draw air.
Ä Chapter 7.3 'Connect station to outflow'
56