Connect Suction Hose To Concentrate Port - Ecolab Inspexx S Betriebsanleitung

Installation and assembly
5.6

Connect suction hose to concentrate port

CAUTION!
Risk of dosing faults when working on the concentrate port
When working on the concentrate port, the setting nut
may get misaligned. This changes the mix ratio of the disinfectant solution:
– During all work on the concentrate port, ensure that the setting nut does not
get misaligned.
– Ensure that the setting nut
of the lock nut
A
1
2
3
C
5
6
Fig. 6: Connect the suction hose
Unscrew and remove the cap nut
A
Remove protective cap
B
Plug in suction hose
C
Screw on the cap nut
D
Adjusting nut
1
Protective equipment:
1.
Unscrew and remove the union nut
Remove the protective cap
2.
Slide the union nut
3.
Plug the suction hose
4.
MAN048969, Ver. 5-05.2024
.
2
B
5
4
D
5
3
Protective work clothing
n
Protective gloves
n
Safety shoes
n
Protective eyewear
n
When turning the union nut, brace the lock nut and setting nut.
from the concentrate
4
onto the suction
3
onto the concentrate
6
is secured against misalignment with the help
1
6
3
Lock nut
2
Union nut
3
Protective cap
4
Concentrate connection
5
Suction hose
6
from concentrate port
3
port
5
hose.
6
port .
C
5
36
on the dosing pump
1
.
A
.
B