Preparing The Station For Maintenance - Ecolab Inspexx S Betriebsanleitung

WARNING!
Burns caused by harmful chemical products
Contact with hazardous chemical products can cause severe burns.
– Read the enclosed safety data sheet carefully before using the chemical
product.
– The safety regulations and the required protective clothing for working with
chemicals must be complied with.
– Safety devices such as showers and eye flushing must be accessible and
checked regularly to ensure that they are fully functional.
– Ensure adequate ventilation and extraction.
– Avoid skin and eye contact.
WARNING!
Risk of slipping due to escaping chemicals
Chemicals leaking in the working and preparation area can cause slipping and
injuries.
– Wear non-slip, chemically resistant shoes when working.
– Always have a suitable binding agent available (according to the chemical
product safety data sheet).
– Seal off the area with the escaping chemical.
– Immediately collect chemicals that have leaked or spilled and dispose of
them properly.
– If necessary, place the chemical container in a trough to collect any
escaping chemicals.
NOTICE!
Material damage due to additional weight loads
Additional weight loads can cause material damage to the station.
– Do not load the station with additional weight
– Do not step upon the station or use it as a climbing aid
– Do not place heavy tools on the station.
NOTICE!
Damage to property due to unsuitable tools
Use of unsuitable tools can cause damage to the station.
– Use only the correct tools!
– Keep tools clean and in perfect condition; replace damaged tools!
9.2

Preparing the station for maintenance

To ensure the safety of service personnel during maintenance, the station must be
prepared for maintenance in accordance with the following steps:
55
Maintenance
MAN048969, Ver. 5-05.2024