ECOLAB Inspexx S Betriebsanleitung Seite 248

Fault rectification
WARNING!
Burns caused by worn or damaged piping, hoses and seals
Corrosive chemicals can escape from worn or damaged pipes, hoses and
seals and cause serious injuries.
– Check pipes, hoses and seals regularly for damage
– Rectify leaks immediately
– Replace pipes, hoses and gaskets within the specified time
WARNING!
Burns caused by harmful chemical products
Contact with hazardous chemical products can cause severe burns.
– Read the enclosed safety data sheet carefully before using the chemical
product.
– The safety regulations and the required protective clothing for working with
chemicals must be complied with.
– Safety devices such as showers and eye flushing must be accessible and
checked regularly to ensure that they are fully functional.
– Ensure adequate ventilation and extraction.
– Avoid skin and eye contact.
WARNING!
Risk of slipping due to escaping chemicals
Chemicals leaking in the working and preparation area can cause slipping and
injuries.
– Wear non-slip, chemically resistant shoes when working.
– Always have a suitable binding agent available (according to the chemical
product safety data sheet).
– Seal off the area with the escaping chemical.
– Immediately collect chemicals that have leaked or spilled and dispose of
them properly.
– If necessary, place the chemical container in a trough to collect any
escaping chemicals.
NOTICE!
Material damage due to additional weight loads
Additional weight loads can cause material damage to the station.
– Do not load the station with additional weight
– Do not step upon the station or use it as a climbing aid
– Do not place heavy tools on the station.
MAN048969, Ver. 5-05.2024 72