Auto Start Function - ECOLAB EcoUp Betriebsanleitung

Setup
7.2

Auto start function

DANGER!
Danger – automatic restart EcoUp
With AutoStart on, the pump automatically restarts when the power supply is
restored, without having to press a switch/button beforehand.
When AutoStart is on, the operator of the EcoUp is responsible for taking
suitable measures to ensure that an unwanted start-up of the EcoUp is
prevented when the mains power is restored after a power cut!
For safety reasons, the [AutoStart] function is not activated when the
EcoUp is delivered.
The [AutoStart] function determines whether the pump is set to "Pause" when the mains
connection is re-established following a power cut, or if the pump should immediately
restart in the set mode.
Fig. 14: Activating AutoStart
Autostart off
1
MAN049656 Rev. 3-01.2024
1
48
2
Autostart on
2