ECOLAB EcoUp Betriebsanleitung Seite 152

Operation
DANGER!
Hands must be washed before breaks and at the end of the working day.
Information about the usual precautions when handling chemicals and about
the use of PPE can be found on the relevant safety data sheet for the chemical
being used and must be complied with.
ENVIRONMENT!
Metering medium that leaks or spills may be harmful to the environment.
Leaks or spills of a metering medium must be cleaned up and disposed of
correctly in accordance with the instructions on the safety data sheet.
It is imperative to use the prescribed PPE.
Preventive action:
Place product containers in a tray to collect leaking fluids without harming the
environment.
DANGER!
Refer to the safety data sheets.
It is essential to observe the instructions at
on page 15 .
WARNING!
Risk of slipping due to fluid in the operation and provisioning area!
– Wear non-slip, chemically resistant shoes when working.
– Place product containers in a tank to prevent a slipping hazard caused by
leaking fluids.
ENVIRONMENT!
Leaked, spilled metering media must be cleaned and disposed of correctly,
according to the instructions on the safety data sheet. It is essential to ensure
that the required personal protective equipment (PPE) is used.
Changing a container:
1.
SWITCH OFF the EcoUp using the On/Off button
2.
Take suction pipe out of the empty container.
3.
Replace the empty container with a full one.
4.
Fit the suction pipe into the full container.
5.
Switch on the EcoUp using the On/Off button
MAN049656 Rev. 3-01.2024
Ä
'Safety data sheets'
.
.
54