ECOLAB EcoUp Betriebsanleitung Seite 127

6.1 Assembly
Installation variants
1
Fig. 3: Countertop and wall-mounting
Countertop-mounting
1
The pump can be mounted both upright (e.g. on a bracket or on the metering container
( Fig. 3 , ), or on the wall
1
To enable variable use, the operating part of the pump can be rotated (see
control unit' on page 75 ), to produce different connection variants.
The dimensions of the pump and the mounting plate are given in the Technical Data
Ä Chapter 13 'Technical data' on page 78
section.
CAUTION!
The mounting plate must be screwed securely to the relevant surface and the
pump must be locked securely into the mounting plate.
The fastening elements (see
Ä
design ensures that they will only fit into the recess in the mounting plate in
one direction.
It is essential to ensure that the stability of the pump is guaranteed and
that it is not loaded by additional (weight) forces. Additional components
must not be attached to or stored on the pump, and people must not
stand on or attach items to pumps which have already been installed.
2
.
2
'Wall mounting' on page 31 ) are marked with an identifier and the
Assembly and connection
Wall mounting
2
Ä
'Tabletop mounting' on page 30 and
29
Ä 'Turning the
MAN049656 Rev. 3-01.2024