ECOLAB EcoUp Betriebsanleitung Seite 159

Fig. 19: Position of the scrollbar on the board
Switch position of the DIP switch on delivery pump
The corresponding conveying capacity is programmed on the test bench before delivery;
all DIP switches on the board are set to "Off".
Performance
Litre capacity according to
Nameplate
N/A = no applicable to capacity selection
Switch position of the DIP switch when the control unit is replaced
Before replacing the control unit onsite, set the correct conveying rate by using the DIP
switch. See the pump's nameplate for the capacity specification
pump – nameplates' on page 25 .
Performance
5 l/h
11 l/h
30 l/h
N/A = no applicable to capacity selection
If multiple switches are enabled, the setting of the switch with the highest
number counts.
Switch
Board 1
All boards
Off
Switch
Board 1
On
10240134
Off
Off
61
Maintenance
2 3 4
N/A
Off Off
Ä 'Identification of the
2 3 4
N/A
Off Off
On
N/A
Off
On
N/A
Off
MAN049656 Rev. 3-01.2024
5 6
N/A N/A
5 6
N/A N/A
N/A N/A
N/A N/A