Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Wichtige Sicherheitshinweise
• To prevent gas leaks, always disconnect the appli-
ance from the gas supply during installation, mainte-
nance or other work on it.
• Before installation, make sure that your local gas
distribution parameters (type and pressure of gas)
are compatible with the hob.
If you are unsure, contact your gas supplier.
• Make sure that the gas hose is stamped with TSE,
is approved for the type of gas used and is in perfect
condition.
• In the case of a gas supply with liquefied petroleum
gas (LPG), ensure that the gas pressure regulator is
TSE-stamped and follow the instructions in this man-
ual regarding the gas pressure exactly.
• The connection of the gas hose to the connector
element must be sealed with a clamp by the installer
and this, as well as all other connection points, must
be checked for leaks (see chapter "Gas connection")
before you put the appliance into operation.
• To avoid damage to the gas hose and associated
hazards, make sure that it is not kinked or crushed
and does not come into contact with hot surfaces,
sharp edges or similar.
8
Werbung
