KKT KOLBE GK3010E Benutzerhandbuch Seite 132

Fitting and Installation
Inserting and fixing the hob
• Insert the hob in the centre of the prepared cut-out
in the worktop.
• Fix the hob to the worktop with the mounting brackets and
screws supplied.
Note:
The tensile force of the screw is usually sufficient to cut
off any protruding parts of the seal due to the pressure of
the hob plate, so that these do not have to be cut off.
1 Hob surface
2 Sealing tape
3 Worktop
4 Hob base
5 Mounting bracket
6 Screw
58
1
2
3
4
5
6