Specifications - Mettler Toledo IND500x Installationsanleitung

1.6 Specifications

IND500x Specifications
Enclosure Type
Dimensions
Shipping Weight
Environment Protection
Storage Environment
Operating Environment
Hazardous Areas
Power
Display
Weight Display
Supported Scale Types
Analog Scale Interface
Number of Scales
Analog/Digital Update Rates
Interface and Function Update
Rates
Clock Accuracy
VESA standard
Keypad
IND500x
Harsh environment desk/wall/column-mount: type 304 stainless steel
enclosure
Harsh Environment: 289 mm x 184 mm x 162 mm (7.2 in. x 11.4 in. x
6.4 in.)
4.0 kg / 8.8 lb (net weight)
Harsh Environment enclosure meets IP65 requirements.
-20°C to 60° C (-4° to 140°F), 10% to 95% relative humidity, non-
condensing.
-10° to 40° C (14° to 104°F), 10% to 95% relative humidity, non-
condensing.
The IND500x is approved for use in Division 1 and Zone 1/21 hazardous
areas.
Before installation, check the data plate of the terminal to confirm it is
marked with the approval for the environment in which it will be used.
APS768x power supply with intrinsically safe outputs
4.3" TFT color display (480 x 272), with 20 mm high weight display
Displayed resolution of 100,000 counts for analog load cell scales
Display resolution for IDNet and SICSpro bases is determined by the specific
base used.
Analog load cells, High-Precision IDNet, High-Precision SICSpro
Load Cell Excitation Voltage: 4.8 VDC
Minimum Sensitivity: 0.3µV/e approved
Up to four 350 Ohms load cells, 1-3 mV/V
Interface for one analog or one IDNet scale or one SICSpro scale
Internal: Analog: >366 Hz; IDNet: determined by base; SICSpro: 50 Hz for
bases that include Advanced Setup Mode
Target Comparison: up to 50 Hz
Weight display: 25 Hz
Internal discrete I/O: 50 Hz
External discrete I/O (ARM100): 25 Hz
PLC cyclic data: 25 Hz
SICS continuous (SIR): up to 20 Hz
MT Continuous Output: up to 20 Hz
Continuous Template (serial): 18 Hz (115.2Kbaud), 14 Hz (38.4Kbaud)
Continuous Template (Eprint): 20 Hz
< 1 second / day (without time server access) at 25° C consistent room
temperature.
100 x 100 mm
27 keys, polyester overlay (PET) with hardcoating, Electro-static discharge
protected, Polycarbonate (PC) display lens
Introduction​ ​ 7