Connections - Mettler Toledo IND500x Installationsanleitung

1.9.2 Connections

The enclosure entries are blank holes of 16 (+0.15/-0) mm in diameter. See more information in [Harsh
Enclosure Cable Glands Page 19].
The following figure shows the connection locations on the back of the harsh enclosure.
Figure 6: IND500x Connectors
Cable Gland Usage and Corresponding Cable Diameter
Connection
Location NO.
(1)
X1
X2
X3
X4
X5
X6
X7
X8
X9
X10
X11
12 Introduction​ ​
X1 X2 X3
X6 X7 X8
Primary Use
Used Connector for
Power supply 6 - 10mm (0.24-0.39in.)
Discrete 5I/8O 6 - 10mm (0.24-0.39in.)
Discrete 5I/8O or analog 6 - 10mm (0.24-0.39in.)
4-20mA output
Discrete 5I/8O or analog 6 - 10mm (0.24-0.39in.)
4-20mA output
COM6 6 - 10mm (0.24-0.39in.)
Current loop or 6 - 10mm (0.24-0.39in.)
analog 4-20mA output or * 2 drill-hole HSK–M-Multi-Ex
Fiber optic*
Current loop or 6 - 10mm (0.24-0.39in.)
analog 4-20mA output or * 2 drill-hole HSK–M-Multi-Ex
Fiber optic*
Discrete 3I/3O 6 - 10mm (0.24-0.39in.)
Discrete 3I/3O 6 - 10mm (0.24-0.39in.)
COM1 6 - 10mm (0.24-0.39in.)
Scale interface 4 - 8mm (0.16-0.31in.)
X4 X5
X9 X10
Cable Diameter Used Connector for
Scale interface
Discrete 3I/3O
Discrete 3I/3O
Power supply
Discrete 5I/8O
Discrete 5I/8O or analog
4-20mA output
Discrete 5I/8O or analog
4-20mA output
Current loop or
analog 4-20mA output or
Fiber optic*
Current loop or
analog 4-20mA output or
Fiber optic*
X11
Alternative Use
Cable Diameter
4 - 8mm (0.16-0.31in.)
COM1 6 - 10mm (0.24-0.39in.)
6 - 10mm (0.24-0.39in.)
6 - 10mm (0.24-0.39in.)
6 - 10mm (0.24-0.39in.)
COM6 6 - 10mm (0.24-0.39in.)
6 - 10mm (0.24-0.39in.)
6 - 10mm (0.24-0.39in.)
6 - 10mm (0.24-0.39in.)
6 - 10mm (0.24-0.39in.)
* 2 drill-hole HSK–M-Multi-Ex
6 - 10mm (0.24-0.39in.)
* 2 drill-hole HSK–M-Multi-Ex
IND500x