Table And Log File Structure; Alibi Memory - Mettler Toledo IND500x Installationsanleitung

Setup Feature
Description
Parameter ID
Tolerance Type
Target
Tolerances/Limits
Totalization
Communication – Connections
COM4 Port
COM5 Port
Communication – Serial – COM1
Baud
Data Bits
Parity
Flow Control
Interface
Communication – Serial – COM2 -6 (Shown only if option with COM2 - 6 is installed)
Baud
Data Bits
Parity
Flow Control
Interface
Communication - Reset
Reset Communication branch to factory defaults.
Maintenance – Configure/View – Change Log
Change Log
Maintenance – Configure/View – Maintenance Log
Maintenance Log
Maintenance – Configure/View – Error Log
Error Log
Maintenance - Reset
Reset Maintenance branch to factory defaults.

3.4 Table and Log File Structure

The IND500x terminal includes an Alibi memory file, a Tare Table, a Message Table, a Target Table, a Change
Log file, a Maintenance Log file, and an Error Log file. Descriptions of each of these are included in this chapter.

3.4.1 Alibi Memory

Alibi memory stores transaction information in a preset format that is not changeable. Alibi memory can be
enabled or disabled in setup at Application > Memory > Alibi.
78 Appendix​ ​
Default Value
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
9600
8
None
None
RS-232
9600
8
None
None
RS-232
Disabled
Disabled
Disabled
Security Access
Administrator / Supervisor
Administrator / Supervisor
Administrator / Supervisor
Administrator / Supervisor
Administrator
Enable / Clear: Administrator
View / Print: Administrator / Supervisor /
Operator
Enable / Clear / Manual Maintenance Log
Entry: Administrator
View / Print: Administrator / Supervisor /
Operator
Enable / Clear: Administrator
View / Print: Administrator / Supervisor /
Operator
Administrator
IND500x