Target Table; Select A Target Record From List; Quick Access To A Target Record - Mettler Toledo IND500x Installationsanleitung

3.4.4 Target Table

The IND500x contains a 199-record Target Table that stores frequently used target-comparison values. The
fields in the record depend upon the operating mode of the Target Table, Tolerance Type and Totalization
settings as selected in setup at Application>Memory>Target Table. There are five choices for the mode –
Manual Filling, Over/Under, Basic Auto Filling, Advanced Auto Filling or Drum Filling. There are either two or
three choices for the tolerance type, depending upon the target mode selection. Totalization can be enabled or
disabled.
When totalization is enabled for the target table, each time a transaction is completed using an activated target
ID, the selected weight value (gross or net weight) is added to the total and the counter increments by one.
A target table record can be recalled by picking from a list of all the values using the TARGET TABLE softkey
followed by the FILTER OFF softkey
value followed by the TARGET TABLE softkey
A printed report of the records in the Target Table is available through the REPORT softkey
reports can also be generated by pressing the TRANSFER softkey
ry>Target Table.
Each record in the Target Table includes:
Figure 66: Target Table Record_Manual Filling
Figure 67: Target Table Record_OverUnder

3.4.4.1 Select A Target Record from list

The TARGET TABLE softkey
1 Press the TARGET TABLE softkey
The Target Search page shows.
2 Press the FILTER OFF softkey
3 Use the Search Field selection boxes and associated data fields to enter specific search information to limit
the search, or use the default "find all" character, the asterisk (*) to view all records.
4 Press the OK softkey
has the lowest record ID at the top of the file and focus is on that record.
5 Use the RIGHT and LEFT navigation keys to view all fields of each record.
6 Use the UP and DOWN navigation keys to move the focus to a specific Target record.
7 Press the OK softkey
The stored target value is recalled from the Target Table and is used as the preset target value. A value
stored in the target table is automatically converted when recalled if it does not match the display unit.
A Target record is selected from list.

3.4.4.2 Quick Access to A Target Record

If the ID number for a specific target record in the Target Table is known, the record can be quickly recalled for
use without going through the view and selection process.
The TARGET TABLE softkey
1 Use the numeric keypad to enter the one - or two - digit ID for the target that is to be used.
2 Press the TARGET TABLE softkey
The stored target value is recalled from the Target Table and is used as the preset tare value. A value
stored in the target table is automatically converted when recalled if it doesn't match the display unit.
82 Appendix​ ​
. It can also be "quick accessed" directly by entering the Target ID
.
is added to the Home Page.
.
.
. The Target Table screen displays with the search results sorted by ID. The file
to load the selected record for the target.
is added to the Home Page.
to quickly recall the ID record entered.
. Target table
from within Setup>Application>Memo-
IND500x