Specifications And Operator Interface; Specifications - Mettler Toledo IND570 Kurzanleitung

2. Specifications and Operator Interface

Specifications

Enclosure Types
Dimensions (l × w × d)
Shipping Weight
Environmental Protection
Operating Environment
Hazardous Areas
AC Input Power
(Harsh and panel-mount
models)
DC Input Power
(Panel-mount models only;
not for POWERCELL model)
Scale Types & Update
Rates
Analog Load Cell
Interface and Function
Update Rates (max)
30205355 | 04 | 05/2019
Panel-mount: Stainless steel front panel with aluminum frame
Harsh environment desk/wall/column-mount: Type 304L stainless steel enclosure
Panel-mount: 265 mm × 160 mm × 66.5 mm / Harsh environment: 265 mm × 148.4 mm × 163 mm
3.2 kg (7 lb)
Panel-mount front panel sealing is UL-approved and certified to IP65
Harsh environment is UL-approved and certified to IP69K
All terminal types can be operated at temperatures ranging from −10° to 40° C (14° to 104° F) at 10% to 95%
relative humidity non-condensing
Not all versions of the IND570 can be operated in areas classified as Hazardous by the National Electrical Code
(NEC) because of the combustible or explosive atmospheres in those areas. Contact an authorized METTLER
TOLEDO representative for information about the IND570xx model for hazardous applications.
Operates at 85–264 VAC, 49–61 Hz, 500 mA
Panel-mount version provides a terminal strip for AC power connections.
Harsh environment version includes a power cord configured for the country of use.
Operates at 24 VDC, -15% - +20%, 1.25A
Panel-mount version provides a terminal strip for DC power connections
24VDC input power option not available on the harsh models
Analog load cells, up to Twelve 350-ohm load cells (2 or 3 mV/V). Update rate > 366 Hz.
or
IDNet High-Precision Line (+12V versions only, including T-Brick cell, M-Cell, Point-ADC). Update rate determined
by IDNet base.
or
SICSpro High-precision platforms that include Advanced Setup Mode, PBK9/PFK9 safe area and Category 3/Division
2 bases (MPGI load cells), update rate ~50Hz
or
Up to 14 POWERCELL load cells for IND570, and up to 6 POWERCELL load cells for IND570xx. Update rate
selectable up to 50 Hz.
or
Single PowerDeck platform. Update rate selectable up to 50 Hz.
Excitation voltage: 10 VDC. Minimum sensitivity: 0.1 microvolts
Weight display: 10 Hz
Analog bases
Internal discrete I/O: 50 Hz
External discrete I/O (ARM100): 25 Hz
PLC cyclic data: 25 Hz
SICS continuous (SIR): 20 Hz
MT Continuous Output: 20 Hz
Continuous Template (serial): 20 Hz (19.2-115.2Kbaud), 14 Hz (9600 baud)
Continuous Template (Eprint): 10 Hz
Weight display: 10 Hz
IDNet terminal
versions Internal discrete I/O: 20 Hz
External discrete I/O (ARM100): 20 Hz
PLC cyclic data: 20 Hz
SICS continuous (SIR): 20 Hz
MT Continuous Output: 20 Hz
Continuous Template (serial): 20 Hz (19.2-115.2Kbaud), 14 Hz (9600 baud)
Continuous Template (Eprint): 10 Hz
METTLER TOLEDO IND570 Quick Guide 3