Appendix; Testing Standards; Cenelec/Atex; Iecex - Mettler Toledo IND500x Installationsanleitung

3 Appendix

3.1 Approvals
This chapter provides approval information for the terminal harsh enclosures. Please read this chapter
thoroughly before beginning installation.
Control Drawing #30595335 contains control drawings for the approvals. These documents should also be
reviewed before beginning installation.

3.1.1 Testing Standards

The terminal has been tested according to the following standards:

3.1.1.1 CENELEC/ATEX

EN IEC 60079-0:2018
EN 60079-11:2012
EN 60079-28:2015
EN 60079-31:2014
EN 60529:1991+ A:2000+ A2:2013

3.1.1.2 IECEx

IEC 60079-0: 2017 Edition 7
IEC 60079-11: 2011 Edition 6
IEC 60079-28: 2015 Edition 2
IEC 60079-31: 2013 Edition 2

3.1.1.3 FMus

FM3600 (2018)
FM3610:2021
FM3810:2021
ANSI/UL 60079-0:2019
ANSI/UL 60079-11:2014
ANSI/UL 60079-28:2017
ANSI/IEC 60529:2004(R2011)
ANSI/UL 61010-1:2016

3.1.1.4 cFM

CAN/CSA-C22.2 No. 60079-0:2019
CAN/CSA-C22.2 No. 60079-11:2014
CAN/CSA-C22.2 No. 60079-28:2016
CAN/CSA-C22.2 No. 61010-1:2012 (R2017)
CAN/CSA-C22.2 No. 60529:2016
C22.2 NO. 0.4-17: 2017
C22.2 No. 25-17:2017
IND500x
General requirements
Protection by Intrinsic Safety "i"
Protection using Optical Radiation "op is"
Dust ignition protection by Enclosure "t"
Degrees of protection provided by enclosures (IP
code)
General Requirements
Protection by Intrinsic Safety "i"
Protection using Optical Radiation "op is"
Dust ignition protection by Enclosure "t"
Hazardous (Classified) Locations General
Requirements
Class I, II, and III, Division 1, Hazardous (Classified)
Locations Intrinsically Safe Apparatus
Electrical Equipment for Measurement, Control and
Laboratory Use
General Requirements
Protection by Intrinsic Safety "i"
Protection using Optical Radiation "op is"
Degrees of Protection Provided by Enclosures (IP
Code)
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory use – Part 1:
General Requirements
General Requirements
Protection by Intrinsic Safety "i"
Protection using Optical Radiation "op is"
Safety Requirements for Electrical Equipment
Degrees of Protection Provided by Enclosures (IP
Code)
Bonding of Electrical Equipment
Enclosures for use in Class II, Groups E, F & G for use
in Hazardous Locations
Appendix​ ​ 49