Mettler Toledo IND500x Installationsanleitung Seite 8

©METTLER TOLEDO 2021
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose without the express written permission of
METTLER TOLEDO.
U.S. Government Restricted Rights: This documentation is furnished with Restricted Rights.
Copyright 2021 METTLER TOLEDO. This documentation contains proprietary information of METTLER TOLEDO.
It may not be copied in whole or in part without the express written consent of METTLER TOLEDO.
METTLER TOLEDO reserves the right to make refinements or changes to the product or manual without notice.
METTLER TOLEDO
trademarks or registered trademarks of their respective companies.
METTLER TOLEDO RESERVES THE RIGHT TO MAKE REFINEMENTS OR CHANGES WITHOUT NOTICE.
This device complies with Part 15 of the FCC Rules and the Radio Interference Requirements of the Canadian
Department of Communications. Operation is subject to the following conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his or her
expense.
Note: Declaration of Conformity may be found at
compliance/.
This manual describes features and functions of the IND500x terminal with version 1.xx firmware. Terminals
with other versions of firmware may differ in some areas.
We do not make direct use of harmful materials such as asbestos, radioactive substances or arsenic
compounds. However, we purchase components from third party suppliers, which may contain some of these
substances in very small quantities.
8
®
is a registered trademark of Mettler-Toledo, LLC. All other brand or product names are
NOTE ON FIRMWARE VERSIONS
Statement regarding harmful substances
COPYRIGHT
FCC Notice
http://glo.mt.com/us/en/home/search/compliance.html/
IND500x