Ten customizable print templates
Report printing
TraxDSP™ digital filtering for analog load cells
TraxEMT™ performance monitoring and recording
CalFREE™ calibration without test weights
Support of the following Application Software Modules:
Manual formulation
Fill Pac
Task Expert
1.3 Operating Environment
Use the weighing terminal only when electrostatic processes leading to propagation brush discharge is
impossible.
Keep the terminal away from processes that generate high charging potential such as electrostatic coating,
rapid transfer of non-conductive materials, rapid air jets, and high pressure aerosols.
Choose a stable, vibration-free surface to mount the terminal.
Ensure there are no excessive fluctuations in temperature and no direct exposure to sunlight.
Avoid drafts on the weighing platform (for example, from open windows or air conditioning).
Calibrate the terminal after any major change of geographical location.
1.3.1 Temperature and Humidity
The terminal can be stored and operated at temperatures and relative humidity conditions as listed in [Specifi-
cations Page 7]
1.3.2 Environmental Protection
The terminal has environment protection as listed in [Specifications Page 7].
1.3.3 Hazardous Areas
The intrinsically safe IND500x terminal is designed to operate within an area classified as Division 1, Zone 1,
or Zone 21.
1.4 Inspection and Contents Checklist
Verify the contents and inspect the package immediately upon delivery. If the shipping container is damaged,
check for internal damage and file a freight claim with the carrier if necessary. If the container is not damaged,
remove the product from its protective package, noting how it was packed, and inspect each component for
damage.
If shipping the product is required, it is best to use the original shipping container. The product must be packed
correctly to ensure its safe transportation.
The product package should include the below items but may vary by region:
IND500x terminal
Quick Guide
1.5 Physical Dimensions
The dimensions for the harsh enclosures of the IND500x terminal are shown below.
IND500x
TM
WARNING
Refer to the data plate of the equipment to determine if it is approved for use in
an area classified as hazardous because of combustible or explosive atmos-
pheres.
Bag of miscellaneous parts
Safety Instructions
Introduction
5