Safety Instructions - Mettler Toledo IND500x Installationsanleitung

Safety Instructions

Read this manual BEFORE operating or servicing this equipment and FOLLOW these instructions carefully.
SAVE this manual for future reference.
Safety Instructions for Installation
IND500x
WARNING
Do not install or perform any service on this equipment before the area in
which the equipment is located has been secured as nonhazardous by
personnel authorized to do so by the responsible person at the customer's site.
WARNING
Only permit qualified personnel to service the equipment. Exercise care when
making checks, tests and adjustments that must be made with power on.
Failure to observe this precaution could result in bodily harm and/ or property
damage.
WARNING
Refer to the data plate of the equipment to determine if it is approved for use in
an area classified as hazardous because of combustible or explosive atmos-
pheres.
WARNING
All equipment must be installed in accordance with the installation instructions
and Control Drawing 30595335 detailed in this manual respectively in the
manufacturer manuals of the associated apparatus. Be careful to study and
follow the guidance (general notes and application specific notes) in the
Control Drawing 30595335. Deviation from the instructions can impair the
intrinsic safety of the equipment and void the agency approval.
WARNING
Install cable seal between differently rated areas per country-specific
regulations. For details, refer to Control Drawing 30595335.
WARNING
For continued protection against shock hazard, connect to properly grounded
power source only. Do not remove the grounding connection.
WARNING
Ensure proper equipotential grounding of the equipment, mounting accessories,
and the scale base.
3