How To Mount The Handle; How To Place On The Desktop Cradle; How To Install The Wall Mount Holder; Medit Scan For Clinics Overview - KULZER cara i700 wireless Bedienungsanleitung

▪ Insert the rechargeable battery into the battery charger with the charging terminals oriented correctly.
▪ The battery charger is only for rechargeable batteries. It takes up to 2 hours and 30 minutes to be fully charged and the charging time may vary
depending on the user environment and the battery cycle count.
The LED on the charger blinks in blue when the battery is charging. When fully charged, the LED lights up in blue.
If the battery is not correctly inserted into the battery charger, the LED on the charger will blink in red. In this case, remove the battery from the
charger, check both terminals of the battery and the charger for foreign objects, wipe them gently with a soft cloth, and then insert the battery again.
1.7.5

How to Mount the Handle

The i700 wireless body is equipped with a wireless signal transmitter located where the i700 wireless logo is. Depending on your experiences and habits,
you may hold the area where the transmitter is mounted. Covering the transmitter area may interfere with the wireless hub's communication. Therefore,
a handle is provided to mount on the i700 wireless handpiece for a more comfortable hand-gripping method.
① Turn over the i700 wireless handpiece to find the silicone body.
③ Fully fasten the bolts of the handle to the handle mounting hole
on the i700 wireless body.
⑤ You can now use it by holding the handle. If you want to remove the handle, proceed in the reverse order of this instruction.
1.7.6

How to Place on the Desktop Cradle

Without the Handle
1.7.7

How to Install the Wall Mount Holder

2. Medit Scan for Clinics Overview

2.1

Introduction

Medit Scan for Clinics provides a user-friendly working interface to digitally record topographical characteristics of teeth and surrounding tissues using the
i700 wireless system.
2.2

Installation

2.2.1

System Requirements

8 User Manual
② Remove the silicone with your hand.
④ Tighten it clockwise using the knob on the handle.
With the Handle