Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
③ Three LEDs on the bottom of the i700 wireless handpiece indicate the remaining battery level.
Turning Off the i700 wireless
Press and hold the power button at the bottom of the i700 wireless handpiece for 3 seconds. If the rechargeable battery is removed without turning the
device off, it may shorten the lifespan of the i700 wireless and the battery.
1.7.2
How to Use the Wireless Hub
The i700 wireless is a wireless device that operates through a wireless module. For this reason, the i700 wireless handpiece has a transmitter and the
wireless hub has a receiver. The i700 wireless wireless system uses two types of frequencies to transmit data and control the i700 wireless handpiece.
Power is supplied by connecting the adapter cable to the wireless hub power port. The power turns off when the adapter port is removed.
When the i700 wireless is turned on, it will automatically try to pair with the wireless hub. Both the i700 wireless handpiece and wireless hub must be
powered and placed in a range of each other to pair. When pairing is in progress, the LED on top of the i700 wireless handpiece flashes. When pairing is
complete, the LED lights up. You can start scanning when the pairing is complete.
▪
▪
▪
▪
Power is supplied from the connected PC without using the adapters when connected with a power delivery cable. In this case, the PC must be
turned on. If the power delivery cable is removed from the PC, the wireless hub will be automatically turned off and the connection status, such
as
pairing, will be initialized.
1.7.3
How to Use the Battery
▪
Rechargeable Battery
▪
Li-ion
▪
3.6 V, 3100 mAh, 11.6 Wh
▪
Insert the battery at the bottom of the i700 wireless handpiece. Insert the battery into the i700 wireless handpiece with the terminal
aligned correctly.
▪
Battery life lasts up to 1 hour.
Battery life may vary depending on the user environment and the battery cycle count.
▪
Extension Cable Battery
▪
The extension cable battery is a cable-type wired battery that is used instead of a rechargeable battery. No charging is required as power
is supplied through the cable.
▪
Connect the battery-shaped connector to the i700 wireless handpiece and connect the cable to the battery charger terminal.
▪
Press the power button on the bottom of the i700 wireless handpiece to supply power.
1.7.4
How to Use the Battery Charger
▪
Connect the adapter port to the battery charger power port to supply power. The power turns off when the adapter port is removed.
▪
▪
▪
▪
▪
i700 wireless uses two antenna modules : 60 GHz for data transmission and 2.4 GHz for the control.
The actual frequency depends on the local regulations.
The actual operational range is up to 5 m, and it may vary depending on the environment.
60 GHz Frequency : 57 - 64 GHz
2.4 GHz Frequency : 2.4 - 2.5 GHz
3 lights : 80 - 100%
2 lights : 50 - 79%
1 light : 20 - 49%
1 blinking light : 1 - 19%
LED lights turned off : 0%
Intraoral Scanner i700 wireless
7
Werbung
Inhaltsverzeichnis
