KULZER Translux Wave Gebrauchsanweisung Seite 40

7.3 Overheat protection ______________________________________________________________ 16
7.4 BUILT-IN Temperature overload sensor defective _________________________________________ 16
7.5 Battery-low signal _______________________________________________________________ 17
8 Cleaning, disinfection and sterilisation _________________________________________________ 17
8.1 Disassembly ____________________________________________________________________ 17
8.2 LIGHT GUIDE - Cleaning and disinfection _______________________________________________ 17
8.2.1 LIGHT GUIDE - Inspection before the sterilisation _________________________________________ 17
8.3 PROTECTIVE LIGHT CONE - Cleaning and disinfection _____________________________________ 17
8.3.1 PROTECTIVE LIGHT CONE - Inspection before the sterilisation ________________________________ 18
8.4 LIGHT GUIDE and PROTECTIVE LIGHT CONE - Packaging before the sterilisation __________________ 18
8.4.1 LIGHT GUIDE and PROTECTIVE LIGHT CONE - Sterilisation __________________________________ 18
8.4.1.1 Sterilisation method ______________________________________________________________ 18
8.4.1.2 Sterilisation parameters ___________________________________________________________ 18
8.5 HAND PIECE - Cleaning and disinfection _______________________________________________ 19
8.6 CHARGING UNIT - Cleaning Casing ___________________________________________________ 19
8.6.1 CHARGING UNIT - Cleaning charging contacts ____________________________________________ 20
8.6.2 CHARGING UNIT - Replaceable charging contacts ________________________________________ 20
GB
9 Shelf storage _____________________________________________________________________ 20
- 2 -
10 Disposal _________________________________________________________________________ 21
11 Troubleshooting ___________________________________________________________________ 22
12 Technical specifications _____________________________________________________________ 24
12.1 Electromagnetic compatibility EN 60601-1-2 ____________________________________________ 25
12.2 Charging unit identification plate _____________________________________________________ 31
12.3 Hand piece identification data _______________________________________________________ 31
13 Warranty ________________________________________________________________________ 31
14 Service __________________________________________________________________________ 32
15 Document history __________________________________________________________________ 32
NOTE
Please use the book icon to find the chapter images
or further information on the fold-out cover.
1x / 2x
Please
fold-out front fold-out rear
cover
Please
cover