Charging Unit Identification Plate; Hand Piece Identification Data; Warranty - KULZER Translux Wave Gebrauchsanweisung

12.2

Charging unit identification plate

Description of the symbols on the identification plate
Product Number.
1
Serial Number.
2
3 Date of manufacture.
4 CE mark.
5 Medical Device mark.
6 Double insulation (device complies with safety class II).
Consult instructions for use.
7
Caution, consult accompanying documents.
8
9 Disposal of old electrical and electronic equipment.
(Applicable in the European Community and other European
countries with separate collection systems.)
10 Nemko mark.
12.3 Hand piece identificaton data
The hand piece is engraved on the bottom
part of its casing with the following infor-
mation:
• Product Number.
• Serial Number.
• Date of manufacture.
• CE mark.
• Medical Device mark.
• Consult instructions for use.
• Caution, consult accompanying docu-
ments.
13

Warranty

Each Mectron unit is subject to a stringent check and final inspection prior to delivery to guarantee perfect operation
of the equipment. For all new Mectron products purchased from a Mectron retailer or importer, Mectron offers a war-
ranty of 2 (two) years from the day of purchase for material and production faults.
During the warranty period, Mectron undertakes to repair (or replace, if it chooses) parts of the products deemed by
Mectron to be faulty, free of charge. No provision has been made for complete replacement of the Mectron products.
Under no circumstances shall Mectron be liable for any direct or indirect personal injury
or damage in the following cases:
• The unit was not used for its intended purpose.
• The unit was not used according to the instructions and specifications described in this manual.
• The electrical installation in the rooms in which the unit is used does not comply with existing legislation and
relevant specifications.
• The assembly, additions, setting, alteration and repair was not performed by Kulzer and/or authorized Kulzer
service partners only.
• The conditions for storing the unit do not comply with the specifications listed in paragraph 12
(Technical specifications).
Excluded from the warranty are transportation damage, damage caused by improper use or negligence, damage
caused by connection to a power supply other than that specified for the equipment and damage to the control lamps,
buttons and all accessories. The warranty shall become invalid if the unit is altered or repaired by personnel not
belonging to Customer Service. When making a warranty claim, the customer forwards the damaged unit, at his own
cost, to the retailer or Mectron importer where he bought the unit. The unit, including the accessories, must be well
packed before shipping (if possible, in the original packaging).
A card containing the following information must be enclosed with the unit if returning the unit:
a) Name, address and telephone number of owner.
b) Name and address of retailer / importer.
c) Photocopy of the delivery note / purchase receipt for the unit by the owner which shows the date,
designation and serial number of the unit.
d) Description of malfunction.
03120197
by Mectron
314ZG000
Data
Matrix
YYYY-MM
Charging Unit Translux
0 3 0 2 0 1 7 9
1
3 1 5 Z G 0 0 0
2
Y Y Y Y - M M
3
4 5 6
AC/DC Adapter Model:
PSAC05R-050L6
Phihong Technology CO LTD
10
Wave
®
5V 1A
DATA MATRIX
m a d e i n I t a l y
7 8
Mectron S.p.A.
Via Loreto 15/A
Carasco GE Italy
9
GB
- 31 -