Electromagnetic Compatibility En 60601-1-2 - KULZER Translux Wave Gebrauchsanweisung

Environmental conditions of unit:
Weight and dimensions:
12.1

Electromagnetic compatibility EN 60601-1-2

WARNING
The device requires specific EMC precautions and must be installed and started up in accordance with the
EMC information given in this paragraph.
Portable and mobile radio communication appliances may affect the correct function of the device.
Guidance and manufacturer's declaration – Electromagnetic emissions
The Translux Wave is intended for use in the electromagnetic environment specified below.
The customer or the user of the Translux Wave should assure that it is used in such an environment.
Emissions test
RF emissions CISPR 11
RF emissions CISPR 11
Harmonic emissions IEC 61000-3-2
Voltage fluctuations / flicker emissions
IEC 61000-3-3
Temperature
Relative humidity
Atmospheric pressure
Charging unit: weight 450 g.
Dimensions: L 140 x W 58 x H 62 mm
Hand piece: weight 150 g (incl. light guide).
Dimensions: L 275 mm, max. ∅ 24 mm
Compliance Electromagnetic environment – Guidance
Group 1 The Translux Wave uses RF energy only for its internal function.
Therefore it's RF emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
Class B The Translux Wave is suitable for use in all establishments,
including domestic establishments and those directly connected
Class A
to the public low-voltage power supply network that supplies
Complies
buildings used for domestic purposes.
Operation Transportation and
storage
10°C – 35°C –20°C – 40°C
(50°F – 95°F) (–4°F – 104°F)
45% – 85% 45% – 85%
800 – 1060 hPa 500 – 1060 hPa
GB
- 25 -