La Marzocco linea Bedienungsanleitung Seite 6

operating in a faulty manner
or breaks down, disconnect
it from the electrical network
(as described in the preceding
point) and close the water
supply valve. Do not attempt
to repair it. Contact a qualified
and authorized professional to
perform any repair. Any repairs
must be performed exclusively
by the manufacturer or by
an authorized centre using
only original parts.
compliance with the above
could compromise the safe
operation of the machine.
16) You should plan
make use of an omnipolar
connector during installation,
as required by local, national,
and international electrical
codes and regulations.
17) In order to avoid dangerous
5
overheating problems, it is
recommended that the power
supply cable be fully unfurled.
18) Do not obstruct air intake
and exhaust grilles and, in
particular, do not cover the
cup warmer tray with cloths or
other items.
19) The machine's power
supply cable must not be
replaced by users. In case the
power supply cable becomes
Non damaged, shut
machine and disconnect the
machine from the electctrical
network by switching off the
to relative circuit breaker
close off the water supply;
to replace the power supply
cord, contact
professionals exclusively.
20) These instructions are also
available in an alternative
format on a website
http://techcenter.lamarzocco.
com.
21) The machine should be
placed on a flat counter and
must be placed in settings with
the following temperatures:
Minimum room temperature:
5°C/41°F;
Maximum room temperature:
32°C/89°F.
22) Check the package to
make sure that the following
off the accessories are included:
• a number
and 2-dose
according to the number of
and groups;
• replacement 1-dose and
2-dose filter baskets
qualified • 1 tamper
• 1 blind filter
• cleaning detergent, for the
groups
of 1-dose
portafilters