Suzuki VZ1600K4 Montageanleitung Seite 28

SAFETY CHECK OUT
!
After completion of the setting-up the motor-
cycle all the following items should be dou-
ble-checked to confirm that the operation and
function of the motorcycle are satisfactory.
Now, setting-up the motorcycle and pre-deliv-
ery inspection have been completed and the
motorcycle can be passed to the customer.
ENGINE AND TRANSMISSION
ITEM MEASURE
Engine oil Check/Refill
Final drive gear oil Check/Refill
Fuel tank Drain/Fill
Throttle cable Check/Adjust
Idle r/min Check/Adjust
Exhaust system Leakage
Fuel system
Circlip/Leakage
connection
Engine coolant Leakage/Level
CHASSIS
ITEM MEASURE
Disc brake (s) Clean/Fluid level
Front brake lever Check/Adjust
Rear brake pedal Check/Adjust
Clutch lever Check/Adjust
Oiling points
All necessary points
Battery Filling electrolyte
Wiring and cable Routing/Operation
Wiring connectors Clean/Tight
Front fork Operation
Rear shock absorber Operation
Tighten all nuts and Torque those listed
bolts in this manual
Cotter pins and
Fasteners, Check
circlip
Inspect/Wash and
Paint and chrome
polish
Light
SPECIFICATIONS Tail/Brake light
2 900 ml Headlight high/low beam
(3.1/2.6 US/Imp qt)
Turn signal light
200 ml
License light
(6.76/7.04 US/Imp
Position light
oz)
(Except for Canada and Australia)
17.0 L
Instrument Lights
(4.49/3.73 US/Imp
Speedometer light
gal)
Tachometer light
2.0–3.0 mm
High beam indicator light
(0.08–0.12 in)
Neutral indicator light
900–1 000 r/min
Turn signal indicator light
Coolant temperature indicator
light
Oil pressure indicator light
2.3 L
Fuel injection system indicator
(2.4/2.0 US/Imp qt)
light
Fuel indicator light
Odometer/trip meter indicator
SPECIFICATIONS Clock
Switch Operations
Ignition switch
Position 1
Dimmer switch
110 mm (4.33 in)
Turn signal switch
Position 1
Engine stop switch
Horn switch
Brake switch
Starter button
Side stand/ignition interlock
switch
Position 2
Clutch lever position switch
Engine
Transmission
Clutch
Brake
Steering
Suspension
Control cables
Leakage
Speedometer and odometer
Trip meter
- 26 -
COLD TIRE INFLATION PRESSURE
SOLO RIDING
250 kPa
FRONT 250 kgf/cm 2
36 psi
250 kPa
REAR 250 kgf/cm 2
36 psi
ELECTRICALS
ITEM
ROAD TEST INSPECTION
ITEM
DUAL RIDING
250 kPa
250 kgf/cm 2
36 psi
250 kPa
250 kgf/cm 2
36 psi
CHECK FOR
Lighting/Adjust
Lighting
Lighting
Operation
CHECK FOR
Starting/Acceleration/
Smoothness/Noise
Operation/Noise
Operation/Noise
Operation/Noise
Stability
Operation
Operation/Proper return
Fuel/Oil/Exhaust
Operation
Operation