Suzuki VZ1600K4 Montageanleitung Seite 10

Fr ont Reflectors
(Canadian Models only)
•
Assemble both left and right reflectors, and
brackets with the nut (D = 5) on each.
A. Reflector (Left)
B. Brackets
Front Reflector (Left)
•
Fit the front left reflector bracket end into the
hole in the left inside the fender brace, and
then install the flanged bolt (D = 6, L = 12)
and tighten the bolt.
A. Bracket End
B. Flanged Bolt
Front Reflector (Right)
•
Install the front right reflector on the other side
in the same way as the left side reflector.
C. Nut
D. Reflector (Right)
C. Front Reflector
(Left)
Front Axle Plug
European Model
•
Fit the front axle plug (plastic) onto the end
(left) of the front axle.
A. Plug
B. Front Axle
Wiring Clamps
•
Push the large end of the plastic clamp into
the hole in the left side of the handlebar and
fasten the left switch harness with it at the
front of the handlebar, and push the small end
into it.
A. Plastic Clamp
B. Harness (Right)
•
Install the plastic clamp and fasten the right
switch harness in the same way as the left
side clamp.
- 8 -
C. Left Fork Leg