Herunterladen Inhalt Inhalt Diese Seite drucken

Suzuki VZ1600K4 Montageanleitung Seite 12

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Brake Disc Cleaning
Clean the front and rear brake discs using
oilless solvent.
WARNING
If not removed, the anticorrosive treat-
ment applied to the brake disc surface
will interfere with brake action, and an
unsafe riding condition could result.
Preparation
Battery Service
Sealed Battery Type:
The battery used in this motorcycle is a sealed
type and never needs to be refilled. Follow the
procedure for activating a new battery to ensure
the best possible battery performance.
Activating the battery requires two steps, fill-
ing the battery with electrolyte, and charging.
Read the electrolyte safety label and the follow-
ing procedures carefully before battery activa-
tion.
CAUTION
Incorrect Battery Activation will reduce
battery performance and service life. Be
sure to strictly follow the Battery Service
instructions in this Manual.
Make sure to use the electrolyte packed in
the crate with the unit. Check the labels on the
battery and the electrolyte container.
A. Electrolyte
B. Battery Type: FTZ16-BS
Sealed battery electrolyte has a higher
concentration of sulfuric acid.
container contains the proper amount
of electrolyte for its specific battery.
Insufficient or incorrect electrolyte will
reduce battery performance and service
life. Electrolyte over capacity can lead
to battery cracking or leaking and result
in corrosion damage to the vehicle.
Battery Removal
Remove the seat.
To remove the seat, remove the mounting
bolts, and pull the seat rearward.
A. Seat
B. Bolt (D = 6)
Remove the right side cover mounting screw.
Pull the side cover outward.
- 10 -
CAUTION
C. Bolt (D = 5)
Each

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis