Suzuki VZ1600K4 Montageanleitung Seite 11

Rear View Mirrors (Left and
Right)
Conventional Type (Single Nut)
•
Loosen the locknut all the way up.
•
Screw the rear view mirror into the holder all
the way, then back it two turns out.
•
Turn the stay to assure visibility to the rear
with the operator sitting on the motorcycle and
tighten the locknut securely.
•
Adjust the rear view mirror by slightly moving
only the mirror portion of the assembly.
A. Locknut
B. Rear View Mirror (Right)
•
Installation and adjustment of the left side are
common with those of the right side. Follow
the procedure specified at the right side.
Turning Stay Type
•
Screw the mounting area of the right rear view
mirror into the holder all the way, and tighten
the lower hexagonal area securely.
A. Lower Hexagonal Area for Tightening
B. Upper Hexagonal Area (Adapter)
C. Rear View Mirror (Right)
Do not force to tighten and/or loosen
the upper hexagonal area (adapter) with
a pair of spanners or wrench. Disas-
sembly of this area is not possible.
Non-permanent locking agent is already
applied to the threads of this inner area.
Forcible loosening may damage the
adapter and/or the turning mechanism
of the stay.
A. Lower Hexagonal Area for Tightening
B. Upper Hexagonal Area (Adapter)
C. Stay
D. Non-permanent Locking Agent applied.
•
Turn the stay to assure visibility to the rear
with the operator sitting on the motorcycle.
•
Adjust the rear view mirror by slightly moving
only the mirror portion of the assembly.
A. Stay
•
Installation and adjustment of the left side are
common with those of the right side. Follow
the procedure specified at the right side.
- 9 -
CAUTION
B. Mirror