Symbols Used; In The Documentation; On The Product - Bosch EPS 205 Originalbetriebsanleitung

en 38 | EPS 205 | Symbols used
1.

Symbols used

1.1

In the documentation

1.1.1 Warning notices - Structure and meaning
Warning notices warn of dangers to the user or
people in the vicinity. Warning notices also indicate
the consequences of the hazard as well as preventive
action. Warning notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
symbol Consequences of hazard in the event of
failure to observe action and information
given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word Probability of
occurrence
DANGER Immediate impending
danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2 Symbols in this documentation
Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible

result intermediate result.
Final result There is a visible final result on
"
completion of the instruction.
|
1 689 989 185 2018-03-24
Severity of danger if
instructions not observed
Death or severe injury
Death or severe injury
Minor injury
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
WARNING - Risk of burns from hot surfaces
Contact with hot components and the hot
test equipment (e.g. injection chamber) may
cause severe burns.
¶
Allow the components and test equipment
to cool down.
¶
Wear protective gloves.
Always wear safety goggles when working
with the EPS 205.
Thoroughly study the operating instructions
before working with the EPS 205.
Always wear protective gloves when working
with the EPS 205.
DANGER - Risk of fatal injury from
electromagnetic fields
The high voltages at the CRI Piezo (charging
of the actuators) and at the adapter cables
are a source of potential fatal injury for
persons wearing pace-makers.
¶
Anyone wearing a pace-maker is not
allowed to perform "Common Rail Injector
(CRI Piezo)" testing.
WARNING – Risk of fire and explosion due
to flammable vapors
There is a risk of fire and explosion when
working with flammable vapors in the
vicinity of the EPS 205 as components of
the EPS 205 could give rise to arcing and
sparkover. Explosions can cause burns and
injuries.
¶
Never expose the EPS 205 to flammable
vapors.
¶
Install the EPS 205 at least 460 mm above
the floor.
The three-phase AC network for the EPS 205
must be protected by an automatic circuit
breaker.
Unplug the three-phase AC connector before
performing service work on the EPS 205.
Robert Bosch GmbH