Symbols Used; User Information; Safety Instructions - Bosch CRI Serie Betriebsanleitung

1.

Symbols used

1.1 �n the documentation
1.1.1 Warning notices - Structure and meaning
Warning notices warn of dangers to the user or people in
the vicinity. Warning notices also indicate the consequenc-
es of the hazard as well as preventive action. Warning no-
tices have the following structure:
Warning
KEY WO�D – �ature and source of hazard!
symbol
Consequences of hazard in the event of fail-
ure to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word Probability of
occurrence
DA�GE�
�mmediate im-
pending danger
WA����G Possible impending
danger
�AUT�O� Possible dangerous
situation
1.1.2 Symbols in this documentation
Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermedi- An instruction produces a vis-

ate result ible intermediate result.
Final result There is a visible final result on
"
completion of the instruction.
1.2 On the product
!
Observe all warning notices on products and ensure
they remain legible.
Robert Bosch GmbH
Severity of danger if in-
structions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | �������� SST | 15
2.

User information

2.1 �mportant notes
Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
Diesel Test Equipment". These instructions must be care-
fully studied prior to start-up, connection and operation
of the CRI/CRIN SST and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Bosch Diesel Test Equipment". These
instructions must be carefully studied prior to start-up,
connection and operation of the CRI/CRIN SST and
must always be heeded.
2.� Electromagnetic compatibility (EM�)
The CRI/CRIN SST satisfies the requirements of the
EMC directive 2004/108/EG.
i
The CRI/CRIN SST is a class/category C2 product
as defined by 2004/108/EG. The CRI/CRIN SST may
cause high-frequency household interference (radio
interference) so that interference suppression may
be necessary. In such cases the user may be re-
quired to take the appropriate action.
en
|
1 689 989 098 2012-12-07