Setting The Measuring Mode - Sony LT 100 Gebrauchsanweisung

5-2-2. Setting the measuring mode

1
2
3
4
5
6
7
• If you do not press
• The LT100 performs the internal processing for all measuring modes regardless of the
Press key to select the mode for setting a measuring mode
MODE
(current value, maximum value, minimum value, or peak-to
peak value) for channel A.
* Each of their indications are correspond to "A", "MAX", "MIN"
and "P-P", respectively.
Press key to select a measuring mode.
The selected mode's indicator blinks.
Press key to set.
SET
The name of set mode flashes.
The other name of modes disappear.
Press key to select the setting mode for channel B.
MODE
The name of channel B set currently flashes.
* When set to A channel display only (Only A) by the initial
setting, the display unit returns to the measuring state.
Set the B channel in the same manner as 2.
Press key to set.
SET
The names of modes set for channels A and B blink.
Press key to return to the measuring state.
MODE
The names of modes set for channels A and B light.
Note
SET
set measuring mode.
1, 4, 7
RESET
P
MODE COMP
A
RESET
SET
B
3, 6 2, 5
key, the previous settings will be kept.
M A X M I N P ― P
A
M A X
A
M A X
A
P ― P
B
25