Interface Cables - Sony LT 100 Gebrauchsanweisung

6-4. Interface cables

34
Use a shielded cable of the thickness shown below for the interface cable. Also, leave the
connected other or opposite side of the shielded cable open; do not connect it to earth
(GND). (The shielded cable should be prepared separately by user.)
Cross section of the cable
Assembling the supplied plug for the counter board
Assembling the supplied plug for the display unit I/O
Outer coating
Cable diameter
For the counter board : Ø8.7 mm (Ø0.34") or less
For the display unit : Ø6.2 mm (Ø0.24") or less
Knitted shield
Case
Cable
Fold back the braided wire and
secure with the metal clips.
Plug
Case