I/O Timing - Sony LT 100 Gebrauchsanweisung

7-2. I/O timing

When outputting all channels
When outputting one channel
40
The timing charts shown below are for the B1 type BCD board. The high level and low level
logic are reversed for the B2 type.
5 to !§, @£ to #£ Data, !¶ DRQ input, @º READY output, 1 SET input
• When Initial setting
DRQ(IN)
READY(OUT)
Previous data
DATA(OUT)
SET(IN)
MAX. 4ms
• When Initial setting
DRQ(IN)
READY(OUT)
DATA(OUT)
SET(IN)
MAX. 4ms
5 to !§, @£ to #£ DATA, !¶DRQ input, @ºREADY output
• When Initial setting
DRQ (IN)
READY (OUT)
DATA (OUT)
MAX. 4ms
• When Initial setting
DRQ (IN)
READY (OUT)
DATA (OUT)
MAX. 4ms
(Refer to P20 for factory-set.)
MAX. 2ms MAX. 2ms MAX. 2ms
MAX. 2ms MAX. 2ms MAX. 2ms
(Refer to P20 for factory-set.)
MAX. 2ms MIN. 2ms
MAX. 2ms MIN. 2ms