I/O (Go/No Go Judgement); Counter Board Pin Assignment - Sony LT 100 Gebrauchsanweisung

6. I/O (Go/No Go judgement)

6-1. Counter board pin assignment

Signal
(Refer to P16 "4-6. Function description".)
Pin No.
1 Reset/recall input (A channel)
2 Start/hold input (A channel)
3 Mode switching valid (A channel)
4 Mode switching 0 (A channel)
5 Mode switching 1 (A channel)
6 Comparator value selection A (A channel)
7 Comparator value selection B (A channel)
8 Alarm output (A channel)
9 Go/No Go output Low (A channel)
10 Go/No Go output Go (A channel)
11 Go/No Go output High (A channel)
12 0 V
13 COM (+)
14 COM (–)
28
The I/O connectors of the counter boards (LZ60-P1/P2) have functions for Go/No Go
output using the comparator function, alarm output, start input, reset input, measuring
mode switching input, and comparator number switching input. In addition, the I/O
connectors of the LT100 have functions for overall Go/No Go output for all channels,
overall alarm output, overall reset input and overall start input for resetting or starting all
channels at once respectively. All inputs and outputs are insulated by photocouplers.
As viewed from the rear of the counter board
Connector being used
Manufactured by Hirose Electric Co., Ltd.
DX10-28S (Counter board receptacle)
DX40-28P (Plug: accessory)
DX-28-CV (Plug case: accessory)
Signal
13 11 9 7 5 3
14 12 10 8 6 4
28 26 24 22 20 18
27 25 23 21 19 17
Pin No.
15 Reset/recall input (B channel)
16 Start/hold input (B channel)
17 Mode switching valid (B channel)
18 Mode switching 0 (B channel)
19 Mode switching 1 (B channel)
20 Comparator value selection A (B channel)
21 Comparator value selection B (B channel)
22 Alarm output (B channel)
23 Go/No Go output Low (B channel)
24 Go/No Go output Go (B channel)
25 Go/No Go output High (B channel)
26 +5 V DC
27 COM (+)
28 COM (–)
1
2
16
15
Signal