Setting The Comparator Values - Sony LT 100 Gebrauchsanweisung

5-2-3. Setting the comparator values

26
1
Press key to select the mode for setting the channel A
COMP
comparator values. Start from the CPH (comparator upper limit)
setting.
2
Press key to select a sign.
Press key to select digits.
A selected digit flashes.
Press key to select a number.
3
Press key to set.
SET
"CPH" flashes.
4
Press key to select the CPL comparator lower limit setting mode. Sign of the CPL
COMP
value flashes.
5
Set the B channel in the same manner as 2.
6
Press key to set.
SET
"CPH" and "CPL" flash.
7
Press key to select the mode for setting the channel B comparator values.
COMP
* When set to A channel display only (Only A) by the initial
setting, the LT100 returns to the measuring state.
8


9


10

Same as 2, 3, 4, 5, 6.

11 


12
13
Press key to select the mode for setting the second set of comparator values.
COMP
Repeat steps 2 to 12 above to set the values. After setting the second set of
comparator values, press
comparator values.
1, 4, 7, 10, 13
RESET
P
MODE COMP
A
RESET
SET
B
3, 6, 9, 12 2, 5, 8, 11
key again to select the mode for setting the third set of
COMP
C P H 1
A
C P L 1