Setting The Measuring Mode - Sony LT10A Serie Bedienungsanleitung

2
Push to select a sign.
Push to select a digit to be set.
The selected digit flashes.
Push to select a numeral.
3
Push to set.
SET
P for A channel flashes.
4
Push P to select B channel preset value setting
mode.
B channels sign flashes "+".
Single channel models return to the measuring state.
5
Same as 2.
6
Push to set.
SET
Both A/B channel P flashes.
7
Push P to returns to the measuring state.
Both A/B channel P lights.
Note
• If
is not pressed the previous setting is kept.
SET
• If the maximum value mode, minimum value mode or
peak-to-peak value mode is set as the measuring mode,
the peak value of each mode has been set is set to the
preset value when the preset value is set to the value
which has more than the peak value.
LT10A / LT11A Series

5-2-2. Setting the measuring mode

1, 4, 7
RESET
P
A
RESET
B
1
Push to select the mode for setting a measuring
MODE
mode (current value, maximum value, minimum value,
or peak-to peak value) for channel A.
∗ Each of there modes are indicated "A", "MAX", "M IN"
and "P-P", respectively.
M A X M I N P ― P
A
2
Push to select a measuring mode.
The selected mode's indicator flashes.
MODE COMP
SET
3, 6 2, 5
(E)
19